Disconnect a wire of "weight" from the rechargeable battery.
Dump pressure in fuel system.
The filter is installed on a fire-prevention partition under the case of the air filter and the block of safety locks and the relay. Remove
the case of the air filter
and the block of the relay and safety locks.
|
Fig. 2.29. An arrangement of a bolt of fastening of the fuel filter on release cars till 2001
|
Wrench turn out the top hollow bolt and weaken the carving union in the basis of the fuel filter
(fig. 2.29)
.
Turn out bolts of fastening of an arm of the fuel filter to a fire-prevention partition and remove the old filter together with an arm.
Note an arrangement of hoses of giving and an exit of fuel on the fuel filter taking into account that the flange of the filter is directed down. Disconnect hoses from the old filter and connect them to the new filter. Install the filter, at the same time the hose of supply of fuel has to be directed up, and a fuel exit hose — down.
NOTE
The recommended frequency: each 50 000 km of a run or 24 months.
|
Screw the carving union on the filter basis. Screw a hollow bolt with new washers in the top part of the filter and tighten its moment 28 N • m.
You make further installation in the sequence, the return to removal.