Emphasis block forward wheels to interfere with movement of the car. Lift a back part of the car and establish it on support. Lower the lever of the parking brake and install the gear shifting lever in neutral situation.
Apply with paint or a marker combination tags on a flange of the main reverse gear and a flange of the driveshaft. It is necessary for repeated installation of a shaft in a starting position, for preservation of balancing of a shaft.
Fig. 10.10. A reversing of bolts of fastening of the back universal hinge of the driveshaft to a flange of the main reverse gear
Turn off nuts and bolts of fastening of the back universal hinge of the driveshaft to a flange of the main reverse gear (
). For access to nuts and bolts turn the driveshaft.
Fig. 10.11. An arrangement of bolts of fastening of an arm of the basic bearing of the driveshaft to the car bottom
Turn out bolts of fastening of an arm of the basic bearing of the driveshaft to the car bottom (
Take the forward party of the driveshaft from the transmission and take out the driveshaft assembled from under the car.