Tighten the parking brake and block back wheels an emphasis.
Weaken nuts of fastening of a forward wheel. Lift a forward part of the car and establish it on support. Remove a forward wheel.
Fig. 11.14. Reversing of the lower bolt of fastening of a support of a forward brake: And – the lower bolt; In – the top bolt; With – a hollow bolt of fastening of a brake hose
Fig. 11.19. Closing of an opening of a brake hose with a piece of a rubber hose
If the support is removed for access to other components, do not disconnect from it a brake hose. Otherwise turn out a hollow bolt of fastening of a brake hose to a support (C in
). For prevention of an effluence of brake fluid close an opening of a brake hose a stopper or a piece of a rubber hose of suitable diameter (
Turn out the top and lower bolts of fastening of a support, at the same time the second key hold the directing fingers from a provorachivaniye (see
). If the support is removed for access to other components, a soft wire tie up it to a forward rack.