Depending on a complete set the lifting and movable panel of the hatch of a roof with the manual or electric drive can be installed on the car. The roof panel with the electric drive can be open or closed manually.
Opening: press the SLIDE switch.
Closing: press the switch from outside, opposite SLIDE.
Movement is carried out during the pressing and deduction of the switch.
As a precautionary measure, the panel of a roof stops when closing on 3/4 courses. For full closing release and repeatedly press the switch.
The panel of a roof can be opened by simple pressing of the UP switch. For closing, press the switch from outside, opposite UP.
For opening of the panel of a roof with the manual drive pull the handle down, pressing one of closing buttons, then open the panel up, before its fixing. For closing pull the handle down, holding the panel with a hand, then close the handle a hand palm.
Fig. 1.20. Release of a side spring of the removable panel of a roof
For removal of the removable panel of a roof pull the handle down, pressing one of closing buttons. Take out spring levers of fastening of the panel from nests, having squeezed them towards each other, and raise the panel
. Unblock an auxiliary hook and rotary motion remove the roof panel from the car. Fix the roof panel on the place intended for it on a door of the luggage compartment. For this purpose turn away the fixing paw on a door of the luggage compartment, install the roof panel on support and attach a paw to handles of the panel
. A forward part of a support is intended for installation of the big (lobby) panel of a roof, and a back part — for the small (back) panel.
Fig. 1.21. Installation of the removable panel of a roof on support of a door of the luggage compartment
For installation to the place of the removable panel of a roof, insert panel hinges into the grooves intended for them, then reject the panel down, at the same time holding it with a hand, and insert spring levers into nests. Press the handle of the panel of a roof and close it.