If the spherical hinge was removed from a rotary fist, establish it and fix by a nut, having tightened it the moment specified in specifications and record the forelock.
Moving a rotary fist towards the car, establish a wheel drive shaft in a nave of a forward wheel.
Connect the lower part of a rack with a rotary fist, insert two bolts and screw on them nuts, without tightening them it is final.
Install the lower lever on the spherical hinge and fix it by a bolt and nuts, without tightening them it is final.
Fix steering draft on a rotary fist.
Having combined earlier put tags, tighten nuts of fastening of the lower part of a rack to a rotary fist and a bolt and nuts of fastening of the spherical hinge to the lower lever.
Establish a brake disk and a support.
Screw a nut of fastening of a shaft of the drive of a wheel to a nave. On models since 2001 use a new nut. Previously tighten a nut.
Establish a wheel and fix it by nuts. Lower the car.
On the car standing on wheels finally tighten a nut of fastening of a shaft to a nave the moment of 216 N • m. On models till 2001 screw a lock-nut and the forelock record it from an otvorachivaniye. On models since 2001 hammer with the hammer and a punch a nut fillet into a groove of a power shaft.
Check and if necessary adjust the angles of installation of forward wheels.