Remove a spring.
Turn out bolts and remove arms of a brake tube and a cable of the parking brake from the longitudinal lever of a back suspension bracket.
Remove a nave of a back wheel together with the bearing. Remove from the longitudinal lever the protection cover of a back brake together with brake shoes and a soft wire fix on a body.
Fig. 12.24. An arrangement of the adjusting cam defining relative position of the longitudinal lever and an arm
Paint or marker note the provision of the adjusting cam defining relative position of the longitudinal lever and an arm (
Turn out a hinged bolt and separate the longitudinal lever of a back suspension bracket from an arm.
Check a condition of the plug for lack of wear, stratification and hardening of rubber. If necessary replace the plug with service stations.
You make installation in the sequence, the return to removal, taking into account the following.
According to earlier put tags establish an adjusting cam of the longitudinal lever defining relative situation and an arm.
Before tightening of a hinged bolt of fastening of the longitudinal lever to an arm raise a jack a back part of the lever to install the lever in situation in which it has to be when the car costs on wheels.
In this position of the lever tighten all nuts and bolts of fastening of a back suspension bracket.
Check and if necessary adjust the angles of installation of back wheels.