Surely replace both springs with car axes even if only one spring is damaged.
At installation use on one axis of the car of a spring with identical technical characteristics (with identical color marking).
Block forward wheels an emphasis. Lift a back part of the car and establish it on support. Remove a wheel.
On models since 2001 disconnect draft of the stabilizer of cross stability from the lower cross lever.
Jack raise the longitudinal lever of a back suspension bracket to squeeze a spring and to unload the shock-absorber.
Fig. 12.20. Arrangement of a bolt of the lower fastening of the back shock-absorber
Turn out a bolt of the lower fastening of the shock-absorber (see
Slowly lower a jack together with the longitudinal lever of a back suspension bracket and remove a spring.
Examine a spring on lack of vykroshivaniye of metal or cracks in a spring covering in the presence of which the spring will fail as a result of local corrosion. Also check a condition of the top support of a spring for absence of damage and if necessary replace it.
You make installation in the sequence, the return to removal.