Operations on replacement of bolts of fastening of a forward and back wheel are carried out equally.
When replacing bolts of fastening of a wheel act as follows:
Weaken nuts of fastening of a wheel.
Lift the car and establish on support. Remove a wheel.
Remove a brake disk or the brake drum.
Fig. 13.21. Use of a stripper for expression of a bolt of fastening of a wheel from a nave of a forward wheel: 1 – nave flange; 2 – a nut, partially navernuty on a bolt; 3 – stripper
Partially screw a nut on a bolt of fastening of a wheel which needs to be replaced (
). A stripper squeeze out a bolt from a nave, turn out a nut and remove a bolt.
Insert a new bolt from a reverse side into a nave opening, establish several thick washers on a bolt and, screwing on it a nut, press it in a nave.
Establish a brake disk or the brake drum.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel