You make adjustment of doors as follows:
Check a condition of hinges of a door for what open a door and lift it up, at the same time without lifting a body.
If movement of a door more than 1,6 mm, replace door hinges.
After installation of a door check that the gap on perimeter of a door was everywhere identical, and also that the external surface of a door was flush with other elements of a body.
For adjustment of a gap on perimeter of a door weaken bolts of fastening of hinges of a door to a door and, moving a door, adjust its situation then tighten fastening bolts.
If thus it is impossible to adjust the provision of a door, then get and enclose adjusting plates under hinges.
For installation of a door flush with other elements of a body weaken bolts of fastening of the hinge of a door to a door and adjust the provision of a door then tighten bolts.
Fig. 14.28. The directions of movement of a shock doggie of the lock of a door for adjustment of provision of a back part of a door
In the last turn weaken bolts and adjust the provision of a shock doggie of the lock of a door so that a back part of a door was flush with a back door or elements of a body (