Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
      Removal and installation of front seats
      Removal and installation of a back seat
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment

Toyota RAV4>> Body>> Removal and installation of seats>> Removal and installation of front seats
In the car locked outside it is impossible to leave anybody, first of all, juvenile children as from within a door it is impossible to open. It is especially important at operation of cars with the electric drive of window regulators because in this case it is impossible to open also windows.

On some models seat belts of front seats are equipped by natyazhitel who represent the pyrotechnic devices intended for a tension of seat belts in case of collision.
On the models equipped with natyazhitel do not remove blocks of natyazhitel and do not disconnect from them electric sockets. At malfunction of natyazhitel of seat belts SRS signaling device in a combination of devices lights up, at the same time it is necessary to address on service station for check and elimination of defect.
On models with side safety cushions before work deactivate system of safety cushions

You make removal of front seats as follows:
Shift a seat against the stop forward and remove plastic covers for access to a sled and back bolts of fastening of a front seat.

Fig. 14.60. An arrangement of back bolts of fastening of a sled of a front seat to a car floor

Turn out back bolts of fastening of a sled to a floor of the car (fig. 14.60) .
Shift a seat against the stop forward and turn out forward bolts of fastening of a sled to a car floor.
Raise a seat, disconnect from it all electric sockets and take a seat from the car.
You make installation of front seats in the sequence, the return to removal.