PREVENTION
Cars are equipped with security systems (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive plugs from the rechargeable battery and wait 2 min. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.
|
You make replacement of the lock and cylinder of the lock of ignition as follows:
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Insert a key into the lock of ignition and turn it in position of ACC.
Remove a steering wheel.
Remove casings of a steering column.
Remove the combined understeering switches.
Disconnect the electric socket from the ignition lock.
|
Fig. 15.22. An arrangement of screws of fastening of the lock of ignition to a steering column
|
Turn out screws and remove the ignition lock together with the lock cylinder (
fig. 15.22
).
|
Fig. 15.23. Extraction of the cylinder of the lock of ignition after installation of a key in the provision of ASS and pressing of a clamp
|
The small screw-driver press a clamp in the case of the lock of ignition and for a key take the ignition lock cylinder (
fig. 15.23
).
For installation of the cylinder of the lock of ignition, press a clamp and in this provision of a clamp, insert the lock cylinder into the ignition lock case, at the same time the clamp has to enter an opening and fix the cylinder in the ignition lock case.
You make further installation in the sequence, the return to removal.