PREVENTIONS
H7 glow lamps of elevated pressure can burst when replacing therefore these lamps should be replaced in gloves and goggles.
Do not concern a glass flask of a lamp barehanded. Fatty traces on a lamp lead to darkening of a flask and a bystry exit of a lamp out of operation. Surely replace the failed lamps with lamps of the same type. Wipe the fatty spots arising on imprudence with a pure lint-free rag or alcohol.
|
You make replacement of lamps as follows:
Open a cowl.
From a reverse side of a headlight disconnect the electric socket, previously having released a clamp.
|
Fig. 15.47. Removal of a rubber protective cover from a headlight
|
Pull a rubber protective cover back and remove it from a headlight (
fig. 15.47
).
Turn a cartridge with a lamp counterclockwise and remove it from a headlight.
Having pulled, take a lama from the boss.
Insert a cartridge with a lamp into a headlight and turn it clockwise.
Establish a rubber protective cover and connect the electric socket.