|
PREVENTION
Before replacement of the glow lamp remove a wire of "weight" from the rechargeable battery.
You remember: if the lamp just burned, it can be too hot.
Before replacement of the glow lamp check the corresponding electric chain and a safety lock.
Do not concern a glass flask of a lamp barehanded. Fatty traces on a lamp lead to darkening of a flask and a bystry exit of a lamp out of operation. Surely replace the failed lamps with lamps of the same type. Wipe the fatty spots arising on imprudence with a pure lint-free rag or alcohol
|
You make replacement of a lamp of the forward index of turn as follows.
|
|
Fig. 15.53. Arrangement of the screw of fastening of glass of the forward index of turn
|
Turn out the screw of fastening of glass of the forward index of turn and for access to a lamp take glass aside (
fig. 15.53
).
Turn a cartridge with a lamp counterclockwise and remove it together with a lamp from the index of turn. Take a lamp from the boss.
You make installation of a lamp in the sequence, the return to removal.
Replacement of lamps in a back lamp on models till 2001
Open a door of the luggage compartment, turn out the screw and remove the decorative cover located under a back lamp.
Turn out 2 screws located in the lower part of a lamp, and separate a lamp from a body.
Turn a cartridge with the fused lamp counterclockwise and remove it together with a lamp from a back lamp. Take a lamp from the boss.
You make installation of a lamp in the sequence, the return to removal.
Replacement of lamps of back lamps on models since 2001
Uncover, located opposite to a lamp.
|
|
Fig. 15.54. Removal of the boss with a lamp from a back lamp on models since 2001
|
Turn a cartridge with a lamp counterclockwise and remove it together with a lamp from a back lamp (
fig. 15.54
). Take a lamp from the boss.
You make installation of a lamp in the sequence, the return to removal.
Replacement of a lamp of the top stoplight
Open a door of the luggage compartment and remove the plastic cover closing the top stoplight.
|
|
Fig. 15.55. Removal of the boss with a lamp from the top stoplight
|
Turn a cartridge with a lamp counterclockwise and remove it together with a lamp from a back lamp (
fig. 15.55
). Having pulled, take a lamp from the boss.
You make installation of a lamp in the sequence, the return to removal.
Replacement of a lamp of illumination of a combination of devices
Remove a combination of devices.
From a reverse side of a combination of devices turn the holder of a lamp counterclockwise and take him from a payment of a combination of devices.
Having pulled for a lamp, take it from the holder.
You make installation of a lamp in the sequence, the return to removal.
Replacement of a lamp of a forward plafond of illumination of salon
|
|
Fig. 15.56. Removal of glass of a forward plafond of illumination of salon
|
Edge of the screw-driver remove glass of a forward plafond of illumination of salon (
fig. 15.56
).
Take a lamp from contact clips. For an exception of destruction of a lamp take it for side contacts
You make installation of a lamp in the sequence, the return to removal.
Replacement of a lamp of a lamp of illumination of registration plate
|
|
Fig. 15.57. Otzhatiye of clamps at removal of a lamp of illumination of registration plate
|
The thin screw-driver wring out 2 clamps and remove a lamp of illumination of registration plate from a door of the luggage compartment (
fig. 15.57
).
Turn a cartridge with a lamp and remove it from a lamp of illumination of registration plate, then remove a lamp from the boss.
You make installation of a lamp in the sequence, the return to removal.
Replacement of a lamp of a fog light
Lift the car on the elevator.
For access to fog lights remove forward wheels and antisplash guards of arches of forward wheels.
|
|
Fig. 15.58. The boss's arrangement with a lamp of a fog light
|
Turn a cartridge and remove it from a fog light, then remove a lamp from the boss (
fig. 15.58
).
You make installation of a lamp in the sequence, the return to removal.
