The recommended frequency: each 12 000 km of a run or 6 months.
The faultless condition of brushes of screen wipers is a necessary condition of ensuring good visibility.
To avoid deformation of brushes, it is regularly necessary to clear them means for washing of glasses. At strong pollution of brushes, for example the remains of insects, clear them by means of a sponge or a pure rag.
One-two times a year are recommended to replace brushes of screen wipers.
At frosts before a trip check whether brushes froze to glass.
At an automatic wash of the car on a windshield wax particles can get. That to remove them, add the means for washing of glasses having property to dissolve wax to a windscreen washer tank.
Filling of a tank for liquid means for cleaning of glasses with voskorastvoryayushchy properties can significantly improve action of screen wipers. Fat-dissolving cleaners do not purify glass of wax completely.
Replace the damaged brushes.
Lift the screen wiper brush lever from a windshield. Turn a screen wiper brush at an angle 90 ° to the screen wiper lever.
Fig. 2.8. Removal of a brush of a screen wiper from the screen wiper lever: And — a clamp
Press a clamp And
of a brush of a screen wiper, then move a brush on the lever and, moving it in the opposite direction, remove from the screen wiper lever.
Fig. 2.9. Direction of removal of a rubber tape from a screen wiper brush
Release captures of a brush of a screen wiper from dredging in an end face of a rubber tape and take a rubber tape of a screen wiper from an end face of a brush
Insert the end of a new rubber tape into captures on the right side of a brush of a screen wiper and, moving, establish it into place, before fixing of captures of a brush of a screen wiper in dredging of a rubber tape.
Install screen wiper brushes on levers in the sequence, the return to removal. At the same time the clamp has to record accurately a brush on the screen wiper lever.
Lower the screen wiper lever on a windshield.