You make removal of the external handle and cylinder of the lock of a door as follows:
Lift against the stop door glass, then remove an upholstery and a pylevlagozashchitny film from a door.
Not to scratch a paint and varnish covering of a door, paste on a door about the handle an adhesive tape.
Through an opening in the internal panel of a door release plastic clips and disconnect drafts from the external handle of a door and the cylinder of the lock.
Till 2001 further operate on models as follows:
– turn out bolts of fastening of the handle and remove from a door the external handle together with the lock cylinder;
– remove a clip and take the lock cylinder from the handle.
Since 2001 operate on models as follows:
Fig. 14.31. Removal of a cap from a door end face for access to the screw of fastening of the cylinder of the lock of a door on models since 2001
Fig. 14.32. Removal of the cylinder of the lock from a door on models since 2001
– remove a cap from a door end face, turn out the screw of fastening and remove the lock cylinder from a door (
Fig. 14.33. An arrangement of bolts of fastening of the external handle to a door on models since 2001
– from the inside of a door turn out a bolt and remove the external handle from a door (
You make installation in the sequence, the return to removal.